View SE2436L_8535863.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 1 applications ? smart meters ? in-home appliances ? smart thermostats features ? integrated pa with 27 dbm output power ? integrated lna with programmable bypass ? integrated antenna switching with tx and rx diversity function ? low fem noise figure of 2.5 db typical ? differential 100 ? common tx/rx rf interface ? fast switch on/off time <1 sec ? 2.0 v ? 4.8 v supply operation ? sleep mode current <1 a ? 4 x 4 x 0.9 mm 24 pin qfn ? pb-free, rohs compliant and halogen free ordering information part no. package remark SE2436L-s 24 pin qfn samples SE2436L-r 24 pin qfn tape & reel SE2436L-ek1 n/a evaluation kit product description the SE2436L is a high perform ance, fully integrated rf front end module designed for zigbee/smart energy and 802.15.4 applications requiring high transmit power. the SE2436L is designed for ease of use and maximum flexibility, with fully matched 50 ? output, and 100 ? differential input , integrated inter-stage matching and harmonic filter, and digital controls compatible with 1.6 ? 3.6 v cmos levels. the rf blocks operate over a wide supply voltage range from 2.0 to 4.8v allowing the SE2436L to be used in battery powered applications over a wide spectrum of the battery discharge curve. functional block diagram k071 vb lna logic control cps ctx csd crx ant_sel pa ant1 ant2 aux trp trn balun figure 1: functional block diagram
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 2 pin out diagram figure 2: SE2436L pinout pin out description pin no. name description 1 ant_sel connect to gpio signal to control ant enna switch (see ?logic controls? table) 2 vb i/o balun dc connection (opt ional, please refer to so c or rfic requirements) 3 trp transmit/receive port from/to transceiver, 100 ? differential 4 trn transmit/receive port from/to transceiver, 100 ? differential 5 crx connect to gpio signal to control SE2436L modes (see ?logic controls? table) 6 vcc1 connect to positive supply 7 csd connect to gpio signal to control SE2436L modes (see ?logic controls? table) 8 vcc2 connect to positive supply 9 ctx connect to gpio signal to control SE2436L modes (see ?logic controls? table) 10 gnd connect to pcb ground 11 cps connect to gpio signal to control SE2436L modes (see ?logic controls? table) 12 vcc3 connect to positive supply 13 dnc leave unconnected 14 dnc leave unconnected 15 dnc leave unconnected 16 dnc leave unconnected
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 3 pin no. name description 17 gnd connect to pcb ground 18 aux auxiliary i/o port 19 ant2 connect to 50 ? antenna 20 gnd connect to pcb ground 21 ant1 connect to 50 ? antenna 22 gnd connect to pcb ground 23 nc not internally connected 24 nc not internally connected paddle gnd exposed die paddle; electrical and thermal ground; connect to pcb ground
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 4 absolute maximum ratings these are stress ratings only. exposure to stresses be yond these maximum ratings may cause permanent damage to, or affect the reliability of the device. avoid operating t he device outside the recommended operating conditions defined below. this device is esd sensitive. handling and assembly of this device should be at esd protected workstations. symbol definition min. max. unit vcc supply voltage -0.3 4.8 v t op operating temperature -40 85 c t storage storage temperature -40 125 c esd all pins (hbm) - 1000 v pin_tx_max tx input power at tr port - +6 dbm pin_rx_max rx input power at ant1 or ant2 ports - +10 dbm vswr voltage standing wave ratio 10:1 recommended operating conditions symbol parameter min. typ. max. unit t a ambient temperature -40 25 85 c current drive capability from vb_in to trn and trp ports 30 ma vcc supply voltage on vcc 2.0 4.0 4.8 v logic input voltages 0 - 3.6 v dc electrical characteristics conditions: vcc = 4.0 v, t a = 25 ? c, as measured on skyworks solutions?s SE2436L-ek1 evaluation board (de- embedded to device), unless otherwise noted symbol parameter conditions min. typ. max. unit i cc-tx27 total supply current tx mode p out = 27 dbm cps = csd = ctx = logic ?1? - 400 - ma i cq-tx quiescent current no rf cps = csd = ctx = logic ?1? - 80 - ma i cc-rx total supply current rx mode crx = cps = csd = logic ?1?, ctx = 0 v - 5 7 ma i cc- rxbypass total supply current rx bypass mode crx = csd = logic ?1?, cps = ctx = 0 v - - 300 ua
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 5 symbol parameter conditions min. typ. max. unit i cc_off sleep supply current no rf, csd = 0 v or crx = ctx = 0 v, all digital controls at 0 v - - 1 a logic characteristics conditions: vcc = 4.0 v, t a = 25 ? c, as measured on skyworks solutions? SE2436L-ek1 evaluation board (de- embedded to device), unless otherwise noted. symbol parameter note min. typ. max. unit v ih logic input high 1.6 - 3.6 v v il logic input low 0 - 0.3 v i ih logic input high - - 2 a i il logic input low - - 1 a logic controls conditions: vcc = 4.0 v, t a = 25 ? c mode mode description note cps csd crx ctx 0 all off (sleep mode) 1, 3 0 0 0 0 0 all off (sleep mode) 1, 2, 3 0 1 0 0 1 rx bypass mode 1, 2 0 1 1 0 2 rx mode 1, 2 1 1 1 0 3 tx bypass mode 1,2 0 1 0 1 4 tx mode 1, 2 1 1 0 1 5 auxiliary mode 1,2 1 0 1 x note: (1) logic ?0? level compliant to v il as specified in the ?logic characteristics? table (2) logic ?1? level compliant to v ih as specified in the ?logic characteristics? table (3) all logic signals must be in a defined state in order to meet the sleep current specification at 1 ua max conditions: vcc = 4.0 v, t a = 25 ? c mode description note cps csd ctx crx ant_sel ant1 port enabled 1 x x x x 0 ant2 port enabled 2 x x x x 1 note: (1) logic ?0? level compliant to v il as specified in the ?logic characteristics? table (2) logic ?1? level compliant to v ih as specified in the ?logic characteristics? table
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 6 ac electrical characteristics, transmit conditions: vcc = 4.0 v, t a = 25 ? c, as measured on skyworks solutions? SE2436L-ek1 evaluation board (de- embedded to device), all unused ports terminated with 50 ? , unless otherwise noted. symbol parameter condition note min. typ. max. unit f in frequency range 2400 - 2483 mhz pout output power at ant1 or ant2 ports vcc = 4.0 v vcc = 3.3 v vcc = 3.0 v 1 - 27 25 22 - dbm s 21 small signal gain 1 27 30 33 db ? s 21 small signal gain variation 1 - - 2 dbp-p s 21byp small signal gain bypass 1 - -2.5 - db tx_g large signal gain variation pin at 0 dbm 1 - - 1 dbp-p hd2-hd10 harmonics p out = 27 dbm 1, 2 - - -42 dbm/mhz acp spectral mask 1, 3 - - -30 dbm trise turn on time 4 - - 800 ns tfall turn off time 5 - - 800 ns stab stability cw, p in = 0 dbm 0.1 ghz ? 20 ghz load vswr = 6:1 all non-harmonically related outputs less than -42 dbm/mhz ru ruggedness cw, pin = +6 dbm, load vswr = 10:1 no permanent damage note: (1) 2400 ? 2483 mhz (2) ieee 802.15.4 source (3) integrated power from band edges to fc 3.5 mhz (4) from 50% of ctx edge to 90% of final rf output power (5) from 50% of ctx edge to 10% of final rf output power
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 7 ac electrical characteristics, receive conditions: vcc = 4.0 v, t a = 25 ? c, as measured on skyworks solutions? SE2436L-ek1 evaluation board (de- embedded to device), all unused ports terminated with 50 ? , unless otherwise noted. symbol parameter condition note min. typ. max. unit f in frequency range 2400 - 2483 mhz rx_gain receive gain cps = csd = logic ?1?, ctx = logic ?0? 1 9.0 11.5 14 db nf receive noise figure cps = csd = logic ?1?, ctx = logic ?0? 1 - 2.5 3.5 db iip3 input 3 rd order intercept cps = csd = logic ?1?, ctx = logic ?0? 1 -3 2 - dbm ip1db input 1-db compression point cps = csd = logic ?1?, ctx = logic ?0? 1 -13 -8 - dbm s11 ant antenna port return loss 1 - -14 -10 db trise turn on time 2 - - 800 ns tfall turn off time 3 - - 800 ns g_bp gain in bypass mode cps = ctx = logic ?0?, csd = logic ?1? - -3 - db ip1db input 1-db compression point in bypass mode cps = ctx = logic ?0?, csd = logic ?1? 19 - - dbm note: (1) 2400 ? 2483 mhz (2) from 50% of ctx edge to 90% of final rf output power (3) from 50% of ctx edge to 10% of final rf output power ac electrical characteristics, diversity antenna function conditions: vcc = 4.0 v, t a = 25 ? c, as measured on skyworks solutions? SE2436L-ek1 evaluation board (de- embedded to device), all unused ports terminated with 50 ? , unless otherwise noted. symbol parameter min. typ. max. unit isol antsw isolation between ant1 and ant2 ports - -20 - db s11 ant1,2 input return loss into 50 ? , ant1 and ant2 ports - -14 -6 db s22 ant1,2 output return loss into 50 ? , ant1 and ant2 ports - -14 -6 db t ant1-ant2 antenna 1 to antenna 2 switching time - 800 - nsec
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 8 package drawing 18 24 1 7 17 2 16 3 15 4 14 5 13 6 23 8 22 9 21 10 20 11 19 12 18 24 1 7 17 2 16 3 15 4 14 5 13 6 23 8 22 9 21 10 20 11 19 12 top view side view bottom view see note 3 4.000 0.050 2.700 0.050 24x 0.400 0.050 24x 0.250 0.050 0.850 0.050 0.30 x 45 0.203 ref. 0?0.050 seating plane 4.000 0.050 2.700 0.050 0.500 notes: 1. all measurements are in millimeters. 2. dimensions and tolerances according to asme y14.5m-1994. unless otherwise speci?d, the following values apply: decimal tolerance: angular tolerance: x.x (1 place) ?0.1 mm ? x.xx (2 places) ?0.05 mm x.xxx (3 places) ?0.025 mm 3. terminal #1 identi?ation mark located within marked area. 4. unless speci?d, dimensions are symmetrical about center lines. 0.10 m c a b 0.10 m c a b 0.05 m c y0676 0.10 m c a b r0.075 typ 0.15 c 2x 0.15 c 2x b a c 0.093 0.307 0.307 0.093 figure 3: package drawing
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 9 tape and reel information parameter value devices per reel 3000 reel diameter 13 inches tape width 12 millimeters figure 4: detailed tape and reel inform ation (all diminensi ons in millimeters)
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 10 recommended reflow temperature profile profile feature snpb eutectic assembly lead (pb) free assembly average ramp-up rate (t l to t p ) 3c/s (max) 3c/s (max) preheat temperature min. (t smin ) 100c 150c temperature max. (t smax ) 150c 200c time (min. to max) (t s ) 60 - 120s 60 - 80s ramp up tsmax to t l - 3c/s (max) time 25c to peak temperature 6 mins. (max) 8 mins. (max) reflow temperature (t l ) 183c 217c time maintained above t l 60 - 150s 60 - 150s peak temperature (t p ) 240 5c 260 +0/-5c time within 5c of actual peak temperature (t p ) 10 - 30s 20 - 40s ramp-down ramp-down rate 6c/s (max) 6c/s (max)
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 11 reflow profile (reference jedec j-std-020) figure 5: reflow temperature profile
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 12 branding information pin 1 indicator skyworks part number lot code yy = calendar year ww = work week cc = country code y0747 2436l figure 6: SE2436L typical part marking c opyright ? 2012, 2014 s kywork s s olution s , inc. all right s re s erved. information in thi s document i s provided in connection with s kywork s s olution s , inc. (? s kywork s ?) product s or s ervice s . the s e material s , including the information contained herein, are provided by s kywork s a s a s ervice to it s cu s tomer s and may be u s ed for informational purpo s e s only by the cu s tomer. s kywork s a ss ume s no re s pon s ibility for error s or omi ss ion s in the s e material s or the information contained herein. s kywork s may change it s documentation, product s , s ervice s , s pecification s or product de s cription s at any time, without notice. s kywork s make s no commitment to update the material s or information and s hall have no re s pon s ibility what s oever for conflict s , incompatibilitie s , or other difficultie s ari s ing from any future change s . no licen s e, whether expre ss , implied, by e s toppel or otherwi s e, i s granted to any intellectual property right s by thi s document. s kywork s a ss ume s no liability for any material s , product s or information provided hereunder, including the s ale, di s tribution, reproduction or u s e of s kywork s product s , information or material s , except a s may be provided in s kywork s term s and c ondition s of s ale. the material s , produ c t s and information are provided ?a s i s ? without warranty of any kind, whether expre ss , implied, s tatutory, or otherwi s e, in c luding fitne ss for a parti c ular purpo s e or u s e, mer c hantability, performan c e, quality or non-infringement of any intelle c tual property right; all s u c h warrantie s are hereby expre ss ly di sc laimed. s kywork s doe s not warrant the a cc ura c y or c ompletene ss of the information, text, graphi cs or other item s c ontained within the s e material s . s kywork s s hall not be liable for any damage s , in c luding but not limited to any s pe c ial, indire c t, in c idental, s tatutory, or c on s equential damage s , in c luding without limitation, lo s t revenue s or lo s t profit s that may re s ult from the u s e of the material s or information, whether or not the re c ipient of material s ha s been advi s ed of the po ss ibility of s u c h damage. s kywork s product s are not intended for u s e in medical, life s aving or life- s u s taining application s , or other equipment in which the failure of the s kywork s product s could lead to per s onal injury, death, phy s ical or environmental damage. s kywork s cu s tomer s u s ing or s elling s kywork s product s for u s e in s uch application s do s o at their own ri s k and agree to fully indemnify s kywork s for any damage s re s ulting from s uch improper u s e or s ale. c u s tomer s are re s pon s ible for their product s and application s u s ing s kywork s product s , which may deviate from publi s hed s pecification s a s a re s ult of de s ign defect s , error s , or operation of product s out s ide of publi s hed parameter s or de s ign s pecification s . c u s tomer s s hould include de s ign and operating s afeguard s to minimize the s e and other ri s k s .
data sheet SE2436L: high power 2.4 ghz 802.15.4 front end module skyworks solutions, inc. ? phone [781] 376-3000 ? fax [781] 376-3100 ? sales@skyworksinc.com ? www.skyworksinc.com 202413c ? skyworks proprietary information ? products and product information are subject to change without notice ? february 14, 2014 13 s kywork s a ss ume s no liability for application s a ss i s tance, cu s tomer product de s ign, or damage to any equipment re s ulting from the u s e of s kywork s product s out s ide of s tated publi s hed s pecification s or parameter s . s kywork s , the s kywork s s ymbol, and ?breakthrough s implicity? are trademark s or regi s tered trademark s of s kywork s s olution s , inc., in the united s tate s and other countrie s . third-party brand s and name s are for identification purpo s e s only, and are the property of their re s pective owner s . additional information, including relevant term s and condition s , po s ted at www. s kywork s inc.com, are incorporated by reference.

▲Up To Search▲

Price & Availability of SE2436L

	To Download SE2436L Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .